GeoLED

The GeoLED provides a cost efficient, environmentally friendly solution for conveyor and walkway lighting. Replacing a conventional 70W HPS lamp, the 40W GeoLED LED module is able to provide illuminance levels as required by AS1680 with a spacing of 12m. The GeoLED was designed to provide a greater than 10 year design life in ardous salt environments. The robust heatsink design allows the luminare to operate at high ambient temperatures whilst still maintaining designed illuminance.

Hours (Avg)
50000
IP Rating
65
IK Rating
07
Warranty
5
Watts
40
Colour Temp
4000
CRI
70
Dimmable
no

Downloads

Customise Your Datasheet

Select
Item Code Description Type Number Quantity Custom Notes
GL80103M.9006 GEOLED 40W 4K SCO BB RAL9006
GL80103.9006 GEOLED 40W 4K SCO RAL9006
  • Chromated, pressure die cast low copper content two pack epoxy painted body
  • Self cleaning visor
  • Side entry mounting fits 27 to 34mm O.D. pipe
  • Ambient 0°C to 50°C
  • Suitable for high vibration and arduous locations
  • The encapsulated low loss high efficiency electronic control gear is housed in an IP66 enclosure

Technical Specifications

Showing 2 of 2 variants
Item Code Description Select
GL80103M.9006 GEOLED 40W 4K SCO BB RAL9006
GL80103.9006 GEOLED 40W 4K SCO RAL9006
Lumen Output Lumen Maintenance CRI Colour Temperature Colour Rated Average Life Lamp Type Voltage Circuit Wattage Wattage Operating Temperature (Max) Height Width Length Heat Sink Material Finish IP Rating IK Rating Dimmable
3380 70 70 4000 Silver 50000 LED (PCBA) 240 42 40 50 156 290 475 Aluminium (Die Cast) Powdercoated 65 07 no
3380 70 70 4000 Silver 50000 LED (PCBA) 240 42 40 50 156 290 475 Aluminium (Die Cast) Painted 65 07 no
Showing 2 of 2 variants

 

For product variations not covered by an item in the table above, Minimum Order Qty's may apply. Pricing and Leadtime available upon request. Please contact Gerard Lighting for assistance.

All images shown on this website are for illustration purpose only. Actual product may vary due to product enhancement or colour variation.

Gerard Lighting products are recommended to be installed and maintained in accordance with the relevant Gerard Lighting installation instructions. Gerard Lighting recommends all its products to be installed by a qualified and licenced electrical contractor, in accordance with AS/NZS3000. In the circumstance where a customer is in doubt or not able to access the relevant Gerard Lighting installation instructions; it is recommended to consult with a Gerard Lighting specialist by calling on 1300 799 300. For any further information, please refer to the Terms and Conditions and Warranty document.

Have a question about this product?

MAKE AN ENQUIRY

or call us on 1300 799 300

Similar Products