Double Jacketed Metal Halide

Heard about the new Australian Standards that call for all Metal Halide highbays to be securely covered with a protective visor or use a protective lamp? Yes, it is true, all Metal Halide highbays must comply with this standard and now Sylvania have the solution with the new 250watt and 400watt Protected Metal Halide lamps.

CRI
65
Dimmable
no
Lamp Style
Elliptical
Lamp Type
HID (Metal Halide)
Beam Angle
360
Base Cap
E40

Downloads

Customise Your Datasheet

Select
Item Code Description Type Number Quantity Custom Notes
644860P MHP250/CL/U/E40 DOUBLE JACKETED
644870P MHP250/CO/U/E40 DOUBLE JACKETED
644900P MHP400/CL/U/E40 DOUBLE JACKETED
645060P MHP400/CO/U/E40 DOUBLE JACKETED
  • Double jacketed Metal Halide lamps - E40 base
  • Suits standard metal halide + ignitor control gear
  • Available in 250 watt or 400 watt clear or coated models
  • Warm up time (from cold start) 5 minutes and typical restart time (from hot) 10 minutes
  • Designed to imporove safety in an open fixture due to the inclusion of a glass shroud around the arc tube
  • Universal burining position
  • NOTE: 250w rated average design lamp life for vertical burning 10,000 hrs and horizontal burning 10,000 hrs

Technical Specifications

Showing 4 of 4 variants
Item Code Description Select
644860P MHP250/CL/U/E40 DOUBLE JACKETED
644870P MHP250/CO/U/E40 DOUBLE JACKETED
644900P MHP400/CL/U/E40 DOUBLE JACKETED
645060P MHP400/CO/U/E40 DOUBLE JACKETED
Lumen Output CRI Colour Temperature Rated Average Life Lamp Style Lamp Type Voltage Beam Angle Wattage Height Width Length Base Cap IPART Approval VEET Certified Dimmable
20500 65 4000 10000 Elliptical HID (Metal Halide) 133 360 250 127 90 211 E40 no no no
20000 65 3700 10000 Elliptical HID (Metal Halide) 133 360 250 127 90 211 E40 no no no
36000 65 4000 20000 Elliptical HID (Metal Halide) 135 360 400 178 120 278 E40 no no no
35000 65 3700 20000 Elliptical HID (Metal Halide) 135 360 400 178 120 278 E40 no no no
Showing 4 of 4 variants

 

For product variations not covered by an item in the table above, Minimum Order Qty's may apply. Pricing and Leadtime available upon request. Please contact Gerard Lighting for assistance.

All images shown on this website are for illustration purpose only. Actual product may vary due to product enhancement or colour variation.

Gerard Lighting products are recommended to be installed and maintained in accordance with the relevant Gerard Lighting installation instructions. Gerard Lighting recommends all its products to be installed by a qualified and licenced electrical contractor, in accordance with AS/NZS3000. In the circumstance where a customer is in doubt or not able to access the relevant Gerard Lighting installation instructions; it is recommended to consult with a Gerard Lighting specialist by calling on 1300 799 300. For any further information, please refer to the Terms and Conditions and Warranty document.

Have a question about this product?

MAKE AN ENQUIRY

or call us on 1300 799 300

Similar Products