Cellite Raw

The Raw is recessed product with wider aperture for improved performance, featuring a white powdercoated heavy‑gauge steel body and trim making it ideal for correctional facilities, holding cells and other high security areas.NOTE: For specification/purchase enquiries, please contact Gerard Lighting as minimum order quantities apply.

OVERVIEW
IP Rating 44
IK Rating 10
Warranty 5
Voltage 240
CRI 80
Colour White
Dimmable no
Finish Powdercoated
Lamp Type LED (PCBA)
Operating Temperature 0 to 40
  • Security recessed LED luminaire for plaster and concrete installations
  • 6mm sealed clear polycarbonate lens with PMMA opalized inner
  • Rated IK10
  • Plaster brackets availble for plaster installations
  • White powder coated, heavy duty steel frame
  • 3000K & 4000K colour temperature
  • Security torx screws
  • CEL-Skin available for pre-cast concrete mounting

Technical Specifications

IP Rating IK Rating Warranty Voltage CRI Colour Dimmable Finish Lamp Type Operating Temperature
44 10 5 240 80 White no Powdercoated LED (PCBA) 0 to 40

Filter Products

Wattage
Lumen Output
Less filters
Add Type#, Qty, Notes to Datasheet
Select Item Code Description Type# Quantity Product Notes
CRWLC123E1ENC CRW LED 24W 2900LM 3K 3W CTR N/L TORX SKB
CRWLC124E1ENC CRW LED 24W 2900LM 4K 3W CTR N/L TORX SKB
CRWLC123P2ENC CRW LED 46W 5400LM 3K 3W CTR N/L TORX SKB
Add to
SpecSelection
Item CodeDescription
CRWLC123E1ENCCRW LED 24W 2900LM 3K 3W CTR N/L TORX SKB
CRWLC124E1ENCCRW LED 24W 2900LM 4K 3W CTR N/L TORX SKB
CRWLC123P2ENCCRW LED 46W 5400LM 3K 3W CTR N/L TORX SKB
Dimensions H x W x L (mm) Lumen Output Colour Temperature Circuit Wattage Wattage Chip Configuration
100 x 341 x 1316
341
100
1316
2900 3000 24 24 PCB
100 x 341 x 1316
341
100
1316
2900 4000 24 24 PCB
100 x 341 x 1316
341
100
1316
5400 3000 46 46 PCB
All images shown on this website are for illustration purpose only. Actual product may vary due to product enhancement or colour variation.

Gerard Lighting products are recommended to be installed and maintained in accordance with the relevant Gerard Lighting installation instructions. Gerard Lighting recommends all its products to be installed by a qualified and licenced electrical contractor, in accordance with AS/NZS3000. In the circumstance where a customer is in doubt or not able to access the relevant Gerard Lighting installation instructions; it is recommended to consult with a Gerard Lighting specialist by calling on 1300 799 300. For any further information, please refer to the Terms and Conditions and Warranty document.

Have a question about this product?

MAKE AN ENQUIRY

or call us on 1300 799 300

Similar Products